ADVFC32SH/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Packaging | Bulk |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Volt to Frequency and Frequency to Volt |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog Special Function Converters |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ADVFC32 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8mA |
| Accuracy | 0.2 % |
| Frequency (Max) | 500kHz |
| Max Input Voltage | 10V |
| Max Dual Supply Voltage | 18V |
| Linearity | ±0.05% |
| Min Dual Supply Voltage | 9V |
| Screening Level | 38535Q/M;38534H;883B |
| Operating Frequency-Max | 0.5MHz |
| Dual Supply Voltage | 15V |
| Negative Supply Voltage-Nom | -15V |
| Source Url Status Check Date | 2013-05-01 14:56:52.015 |
| Full Scale | ±150ppm/°C |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADVFC32SH/883B Overview
Embedded in the TO-100-10 Metal Can package, it can be found here. In this case, the electronic part is mounted in the direction of Through Hole. Packaged in a way consistent with Bulk. In this case, an electrical device of type Volt to Frequency and Frequency to Volt is being used. There are 10 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device is equipped with a pin count of 10. An electrical supply of voltage 15V supplies power to the device. It is possible to determine the related parts of a base part number. 10 pins are pronged contacts located on the signal interface of a computer or other communication device. For its reliability, it operates at a minimum operating temperature of -55°C. As a measure to ensure its reliability, it operates at a maximum operating temperature of 125°C. Through Hole is mounted in the way. Including this part is in Analog Special Function Converters. It operates with the maximal frequency of 500kHz. In order for 8mA to perform its functions to the fullest extent, it requires a supply current. There are electronic parts with a maximum input type of 10V. The operating supply voltage of this electrical device is 15V. Power is supplied by a dual supply voltage of 15V. A maximum operating frequency of 0.5MHz is used.
ADVFC32SH/883B Features
TO-100-10 Metal Can package
10 terminations
10 pin count
10 pins
A dual supply voltage of 15V
The maximal operating frequency of 0.5MHz
ADVFC32SH/883B Applications
There are a lot of Analog Devices Inc. ADVFC32SH/883B V/F & F/V Converters applications.
- Low-Cost Analog-to-Digital Conversion
- Isol ated data transmission
- Voltage to Frequency Conversions
- Speed Governors
- FM Demodulation
- Fm analog signal mod/d emod
- Frequency-to-Voltage Conversion (Tachometer)
- Cruise Control
- Frequency Meters/Tachometer
- Microprocessor Data Acqusition
