ALD2331APAL
| Parameters | |
|---|---|
| Input Bias Current | 20pA |
| Voltage - Input Offset (Max) | 0.5mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 50mA @ 5V |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Power Dissipation | 600mW |
| Reach Compliance Code | unknown |
| Pin Count | 8 |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Quiescent Current | 180μA |
| Response Time | 750 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Input Offset Voltage (Vos) | 500μV |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
ALD2331APAL Overview
The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.There is a CMOS, NMOS, Open-Drain, TTL output type for this comparator.The chip is packaged with Tube .Electronic comparator is possible to classify the chip as General Purpose .A total of 2 elements can be found in it.Electronic comparator has 8 pins.The type of mounting recommended is Through Hole .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.8 pins are available on the comparator.As a result, this comparator displays a quiescent current of 180μA .A Through Hole is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 180μA .A current supply greater than 180μA may result in the comparator malfunctioning.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 103.52dB .Comparator electronics comes from the series of EPAD? comparator parts.
ALD2331APAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
Voltage Gain: 103.52dB
ALD2331APAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2331APAL linear comparators applications.
- Threshold Detectors
- Battery-Powered Electronics
- Consumer Medical Electronics
- Metering Systems
- Window Comparators, Multivibrators
- High-Speed Sampling Circuits
- Infotainment and Clusters
- Appliances
- Ultra-Low Power Systems
- General Purpose Low Voltage Applications
