ALD2331ASAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Power Dissipation | 600mW |
| Reach Compliance Code | unknown |
| Pin Count | 8 |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 3 |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 180μA |
| Response Time | 1.1 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Input Offset Voltage (Vos) | 500μV |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Input Bias Current | 20pA |
| Voltage - Input Offset (Max) | 0.5mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 50mA @ 5V |
| RoHS Status | ROHS3 Compliant |
ALD2331ASAL Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, NMOS, Open-Drain, TTL is used for this comparator.This device is designed in Tube case.It's a typical General Purpose comparator.In total, it contains 2 elements.The pinout of the component starts from 8 pins it has.In general, mounting type Surface Mount is recommended.The operating temperature should be set to 0°C~70°C to avoid mal-function.8 pins are present on the comparator.There is a quiescent current of 180μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires 180μA supply current.The compartator could be damaged if the current supply exceeds 180μA .Comparator electronics follows that the voltage gain of the part is 103.52dB .For the output to be of high quality, 3 channels must cooperate together.Comparator electronics comes from the series of EPAD? comparator parts.
ALD2331ASAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
Voltage Gain: 103.52dB
ALD2331ASAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2331ASAL linear comparators applications.
- Point of load regulators
- Wireless Base Stations
- General-Purpose Portable Devices
- Window Comparators
- Ultra-Low Power Systems
- Building automation
- Power management
- Motor drives
- Threshold Detectors
- System control and monitoring
