ALD2331BSAL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Power Dissipation | 600mW |
| Reach Compliance Code | unknown |
| Pin Count | 8 |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Quiescent Current | 180μA |
| Response Time | 2.4 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Input Bias Current | 20pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 50mA @ 5V |
| RoHS Status | ROHS3 Compliant |
ALD2331BSAL Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, NMOS, Open-Drain, TTL output type for this comparator.Electronic comparator is shipped by Tube .Speaking of types, this is a typical General Purpose comparator.There are a total of 2 elements in it.There are 8 pins on this board.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.In this comparator, the quiescent current is 180μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 180μA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 180μA .From the voltage formula, the voltage gain of the part is 103.52dB .Comparator electronics comes from the series of EPAD? comparator parts.
ALD2331BSAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
Voltage Gain: 103.52dB
ALD2331BSAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2331BSAL linear comparators applications.
- Current and voltage sensing
- Industrial
- Threshold Detectors
- General-Purpose, Low-Voltage Applications
- Simple Analog-to-Digital Converters (ADCs)
- Mobile Phones
- Automatic Test Equipment
- Battery-Powered Electronics
- Wireless Base Stations
- General Purpose Low Voltage Applications
