AM26C31CDBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Driver |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | AM26C31 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 3mA |
| Propagation Delay | 7 ns |
| Logic Function | Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 4 |
| ESD Protection | No |
| Transmit Delay-Max | 12 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.02A |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.000001A |
| Number of Transmitters | 4 |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AM26C31CDBR Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-SSOP (0.209, 5.30mm Width) package.The Tape & Reel (TR) package contains this receiver.It has proved to be a valuable component for a variety of applications since it is a Driver can transceiver.Any Surface Mount-type PCB or development board can be used with this wide receiver.With respect to the power supply, this differential driver uses 4.5V~5.5V.This electronic part can have?up to 4/0 eligible receivers/drivers on the field at once.?This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.Transceiver comes with 16 standard pinouts that meet the market's requirements.With the part number AM26C31 identifying the product type, temperature, package, etc., you can search with it to see more variants.16-pin driver IC with improved power dissipation control.In terms of resolution, this ic receiver was capable of providing a 4-bit resolution.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.It is designed so that it can be operated from a 5V power supply with this driver IC.It has the ability to drive LEDs with an input voltage of up to about 100μA with the help of this integrating circuit.In telecommunications, transmitters generate radio waves in order to transmit or send data through an antenna to transmit or send data using radio waves.
AM26C31CDBR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
AM26C31CDBR Applications
There are a lot of Texas Instruments AM26C31CDBR Drivers/Receivers/Transceivers applications.
- VoIP phones
- Broadcast application
- Structural bonding
- Ethernet circuitry
- Telecom applications
- 1x/2x Fiber Channel
- Wireless network systems
- Radio transmission
- Wireless multimedia center in smart home
- Aircraft positioning
