AM26C31QDR
| Parameters | |
|---|---|
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 4 |
| ESD Protection | No |
| Transmit Delay-Max | 12 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.02A |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.000001A |
| Number of Transmitters | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Driver |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | AM26C31 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 100μA |
| Propagation Delay | 7 ns |
| Logic Function | Transceiver |
AM26C31QDR Overview
LED drivers with the enhanced 16-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.The package of this receiver is Tape & Reel (TR).As a Driver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 4.5V~5.5V power supply.Up to 4/0 receivers/drivers can be installed simultaneously on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~125°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.With the part number AM26C31 identifying the product type, temperature, package, etc., you can search with it to see more variants.16-pin driver IC with improved power dissipation control.Using this ic receiver, you were able to achieve a resolution of 4 bits.An input voltage supply of 5V is required to operate the transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.4 transmitters are used in telecommunications to transmit or send data using radio waves.
AM26C31QDR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
AM26C31QDR Applications
There are a lot of Texas Instruments AM26C31QDR Drivers/Receivers/Transceivers applications.
- 1x/2x Fiber Channel
- Transmission stations
- Data center
- Satellite communication
- Wireless teaching
- Wireless 3D game
- Wireless projection application for business talks
- Notebook
- Laser diode bonding
- Automation systems
