AM26LS32AIN
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Current Rating | 70mA |
| Base Part Number | AM26LS32 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 52mA |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Propagation Delay | 22 ns |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 50mV |
| ESD Protection | No |
| Receive Delay-Max | 35 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 4 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Max Power Dissipation | 1.375W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
AM26LS32AIN Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-DIP (0.300, 7.62mm) package.There is a Tube package for this receiver.It has proved to be a valuable component for a variety of applications since it is a Receiver can transceiver.You can place this wide receiver to any Through Hole-type PCB or development board.It takes 4.75V~5.25V from the power supply to run this differential driver.As many as 0/4 eligible receivers/drivers can be used simultaneously with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.In this package, you will find 16 market-standard pinouts for this transceiver.As the base part number AM26LS32 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control is provided by this 16-pin driver IC.A combination of optical transceiver downsizing and high-density Through Hole mounting reduces the package size dramatically.There is a voltage input supply of 5V required for the operation of this integrated circuit.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.In module isolated transceiver are 4 receivers.On the integrator circuit are embedded 0 drivers.Using the input voltage of 52mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.If the input current exceeds 70mA, this can transceiver could malfunction.
AM26LS32AIN Features
Tube package
16 pin count
16 pins
5V power supply
AM26LS32AIN Applications
There are a lot of Texas Instruments AM26LS32AIN Drivers/Receivers/Transceivers applications.
- Wireless smart house
- Copper connection network
- Gigabit Ethernet
- Optical sub-assembly (OSA)
- Vehicle
- Satellite communications networks
- Wireless access points
- Point-to-point networking
- interconnection between computers
- Long-distance fiber optic network applications
