AP2155MPG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2155 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2155MPG-13 Overview
It is package in Tape & Reel (TR) case.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it.The LED driver is mounted as Surface Mount.The switch type is USB Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of P-Channel volts.It has a total of Status Flag features.The AP2155 family contains this object.It consists of 8 terminations in total.In order to operate, the 8 pins are used.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 8 pins are present on it.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.This part has a power supply of 3/5V volts.
AP2155MPG-13 Features
Supplied from 3.3V
AP2155MPG-13 Applications
There are a lot of Diodes Incorporated AP2155MPG-13 Power Switches ICs applications.
- Handheld Devices
- Portable GPS
- Smartphone and PDA
- Hot Swaps
- USB Protection
- Portable GPS Device
- Solid-State Drives
- Portable Music Players
- Set-top-box
- Low Voltage I/O System Power
