AP2171WG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 115MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2171 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2171WG-7 Overview
Tape & Reel (TR) is the way it's packaged.Package SC-74A, SOT-753 contains it.The mounting type of the LED driver is Surface Mount.It owns the USB Switch switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The lighting driver has Status Flag features.It belongs to the family AP2171.A total of 5 terminations have been recorded.5 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.The maximum output current drops to 1A in order to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.It is positioned in the direction of Surface Mount.This LED driver is equipped with a total of 5 pins.115MOhm is the resistance of the lighting driver.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.
AP2171WG-7 Features
Supplied from 5V
Resistance of 115MOhm
AP2171WG-7 Applications
There are a lot of Diodes Incorporated AP2171WG-7 Power Switches ICs applications.
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Wireless Headsets
- Wearable Devices
- HDD and SSD
- Portable Music Players
- Portable GPS
- Set-top-box
- USB Ports/Hubs
- Handheld Devices
