banner_page

AP2181DFMG-7

P-Channel 0.5mm PMIC AP2181 6 Pin 5V 6-UFDFN Exposed Pad


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-AP2181DFMG-7
  • Package: 6-UFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 392
  • Description: P-Channel 0.5mm PMIC AP2181 6 Pin 5V 6-UFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AP2181
Pin Count 6
Number of Outputs 1
Output Type P-Channel
Max Output Current 1.5A
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2.7V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Switch Type USB Switch
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ) 90m Ω
Height Seated (Max) 0.53mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-UFDFN Exposed Pad
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2012
JESD-609 Code e4
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V

AP2181DFMG-7 Overview


Tape & Reel (TR) is the way it's packaged.It is included with the 6-UFDFN Exposed Pad package as well.Surface Mount is the mounting type of the LED driver.A USB Switch switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.Voltage output is P-Channel volts at maximum.It is equipped with Load Discharge, Status Flag features.It belongs to the family AP2181.It consists of 6 terminations in total.The 6 pins are used for the operation of the system.The LED driver has 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.Supply voltages of 5V allow for high efficiency.It is mounted in the way of Surface Mount.A total of 6 pins are included in this LED driver.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.

AP2181DFMG-7 Features


Supplied from 5V
1 channels

AP2181DFMG-7 Applications


There are a lot of Diodes Incorporated AP2181DFMG-7 Power Switches ICs applications.

  • Low Voltage I/O System Power
  • HDD and SSD
  • Gaming
  • Portable Video Game Players
  • Solid State Drivers
  • Smartphone and PDA
  • Hot Swap
  • Solid-State Drives
  • Notebook PC
  • USB Power Distribution

Write a review

Note: HTML is not translated!
    Bad           Good