AP2181SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 115MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 2.1A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2181 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2181SG-13 Overview
It is package in Tape & Reel (TR) case.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.This switch is of type USB Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.Features of the lighting driver are Status Flag.The AP2181 family contains this object.A total of 8 terminations have been found in it.For operation, 8 pins are used.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 1.5A.Supply voltages of 5V allow for high efficiency.Surface Mount is mounted in the way.8 pins are equipped with it.Lighting drivers with 115MOhm resistance are used.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).The supply voltage (Vsup) should be kept above 2.7V for normal operation.In this case, the power supply is 3/5V.
AP2181SG-13 Features
Supplied from 5V
Resistance of 115MOhm
AP2181SG-13 Applications
There are a lot of Diodes Incorporated AP2181SG-13 Power Switches ICs applications.
- HDD, SSD
- Notebook PC
- Smart Phones, Feature Phones
- USB Protection
- Wearable Devices
- Hard Disk Drives
- USB Power Distribution
- Gaming
- Set-Top Boxes
- Hot-Swap Systems
