AP2182ASG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2182A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2182ASG-13 Overview
It is packaged in the form of a Cut Tape (CT).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.In this case, the LED driving board is mounted as Surface Mount.There is a USB Switch switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There is a default setting of 2 for output.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.This LED driving board is equipped with Load Discharge, Status Flag features in order for it to be useful.I believe it belongs to the AP2182A family.There are 8 terminations in it.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.This results in the maximum output current dropping to 1.5A to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.Currently, the LED driving board has a resistance of 130mOhm ohms.In this case, Vsup (maximum supply voltage) is set to 5.5V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 2.
AP2182ASG-13 Features
Supplied from 5V
Resistance of 130mOhm
2 channels
AP2182ASG-13 Applications
There are a lot of Diodes Incorporated AP2182ASG-13 Power Switches ICs applications.
- Storage Drives
- Low Voltage I/O System Power
- USB Ports/Hubs
- HDD and SSD
- PC Cards
- Portable GPS Device
- Set-Top Boxes
- USB Power Distribution
- Notebook PC
- Hot Swap
