AP2192ASG-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2192A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2192ASG-13 Overview
Cut Tape (CT) is the way it's packaged.The 8-SOIC (0.154, 3.90mm Width) package includes it.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is USB Switch.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There is a default setting of 2 for output.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is P-Channel volts.Load Discharge, Status Flag features are available on the lighting driver.This object belongs to the AP2192A family.A total of 8 terminations can be found in it.For operation, we use the 8 pins.The LED driver has 1 functions.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.A supply voltage of 5V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.It has a resistance of 130mOhm.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 2 channels available.
AP2192ASG-13 Features
Supplied from 5V
Resistance of 130mOhm
2 channels
AP2192ASG-13 Applications
There are a lot of Diodes Incorporated AP2192ASG-13 Power Switches ICs applications.
- Hot-Swap Systems
- Low Voltage I/O System Power
- Hard Disk Drives
- Portable Music Players
- Handheld Devices
- Smartphone and PDA
- Storage Drives
- Wireless/Networking Cards
- Wearable Devices
- Set-Top Boxes
