AP2552FDC-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2552 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 500 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Switch-on Time-Max | 3000000ns |
| Rds On (Typ) | 80m Ω |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2552FDC-7 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 6-UDFN Exposed Pad package, it is included.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of P-Channel volts.Features of the lighting driver are Load Discharge, Status Flag.It belongs to the family AP2552.It has a total of 6 terminations.6 pins are used for operation.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 2.1A to meet the operation criteria.The supply voltage can be 5V for high efficiency.The LED driving board is mounted in the way of Surface Mount.There is 80mOhm resistance on the LED driver.Vsup (maximum supply voltage) is set to 5.5V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.This LED driving board uses an analog IC SPST.In total, 1 channels are available.
AP2552FDC-7 Features
Supplied from 5V
Resistance of 80mOhm
1 channels
AP2552FDC-7 Applications
There are a lot of Diodes Incorporated AP2552FDC-7 Power Switches ICs applications.
- Mobile Communication Devices
- Wireless/Networking Cards
- Storage Drives
- Solid State Drivers
- Telecom and Network Systems
- Portable Devices
- Wearable Devices
- HDD and SSD
- PC Cards
- USB Protection
