AP8803WTG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Weight | 6.293594mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Digi-Reel® |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Current Rating | 1A |
| Frequency | 700kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP8803 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 8V |
| Output Current | 1A |
| Max Supply Current | 5mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Max Input Voltage | 30V |
| Output Current per Channel | 1A |
| Current - Output / Channel | 1A Switch |
| Max Output Power | 3W |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 7 |
| Switching Frequency | 500kHz |
| Multiplexed Display Capability | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP8803WTG-7 Overview
Space is saved using its SOT-23-5 Thin, TSOT-23-5 package. LED drivers are designed with 1 outputs.As a mounting method, Surface Mount is used.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.It is possible for the led driver ic to function normally at -40°C~125°C TA.Based on the frequency of 700kHz, it operates on the basis of a pulse.It operates using 5 terminations.To form its configuration, there are 5 pins.The number of segments is 7.The mount is in the direction of Surface Mount.It is under the base part number AP8803 that the LED driver can be found.An acceptable maximum value for the supply voltage is 30V.In addition, it is equipped with a total of 5 pins.According to its characteristics, it is also classified into Display Drivers.This device requires a minimum voltage of 8V volts.To meet high efficiency standards, it works with a voltage of 8V.It is possible to supply current up to 30V.The device can deliver high efficiency when the maximal supply current is less than 5mA.It is possible to supply the load with 1A current.The electronic component can fully perform its functions if the switching frequency is maintained at 500kHz.This device has a voltage output of 30V volts.
AP8803WTG-7 Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~125°C TA
Frequency of 700kHz
Supply voltage of 12V
Switching frequency of 500kHz
Output voltage of 30V
AP8803WTG-7 Applications
There are a lot of Diodes Incorporated AP8803WTG-7 LED Driver ICs applications.
- Sports Facility Lighting
- Refrigeration lighting
- Museum lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Scanners and Handy Terminals
- LED headlights
- Panel lighting
- Flicker-free LED Lighting using R1580N
- Down lighting
- Stage and Studio lighting
