ARE1012
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Material | Gold Plating |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Number of Pins | 9 |
| Weight | 5g |
| Operating Temperature | -40°C~70°C |
| Packaging | Bulk |
| Published | 2000 |
| Series | ARE |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Termination | PC Pin |
| Additional Feature | RELEASE TIME WITHOUT DIODE |
| HTS Code | 8536.41.00.20 |
| Depth | 11.2mm |
| Frequency | 2.6GHz |
| Termination Style | PC Pin |
| Contact Resistance | 100mOhm |
| Insulation Resistance | 100000000Ohm |
| Contact Current(DC)-Max | 0.5A |
| Max Current Rating | 500mA |
| Impedance | 50Ohm |
| Electrical Life | 300000 Cycle(s) |
| Throw Configuration | SPDT |
| Max Voltage Rating (DC) | 30V |
| Contact Form | SPDT (1 Form C) |
| Relay Type | RF |
| Coil Resistance | 720Ohm |
| Operate Time | 10ms |
| Coil Voltage | 12VDC |
| Coil Type | Non Latching |
| Switching Voltage | 30VDC -Max |
| Coil Current | 16.7mA |
| Release Time | 5ms |
| Contact (DC) Max Rating R Load | .5A@30VDC |
| Must Operate Voltage | 9VDC |
| Power Consumption | 200mW |
| Must Release Voltage | 1.2VDC |
| Contact/Output Supply Type | DC |
| Relay Action | MOMENTARY |
| Coil Voltage (DC) | 12V |
| Coil/Input Supply Type | DC |
| PCB Hole Count | 9 |
| VSWR | 1.7 |
| Insertion Loss (dB) | 0.7 dB |
| Input Power-Max (CW) | 10W |
| Input Switching Control Type | Random |
| Dielectric Strength Between Coil and Contacts | 1000 Vrms |
| Switching Current | 1A |
| Test Voltage | 500V |
| Switching Time | 15 ms |
| Isolation Max | 30 dB |
| Height | 8.9mm |
| Length | 20.2mm |
| Width | 11.2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
See Relate Datesheet
