AS1741G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 800mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 362mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 250mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| -3db Bandwidth | 130MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF 35pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 22ns, 14ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Length | 3mm |
| RoHS Status | RoHS Compliant |
AS1741G Overview
Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. There are 8 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 8 pins. Multiplexers built on a SPST - NO switching circuit are built. There are 2 circuits in this switch device. As far as internal resistance is concerned, it has 800mOhm. You can find the functions of the 8 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 3.6V. Digital switch that provides Single power at a cost-effective price. 1.6V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 10nA current. This analog switch requires a voltage of 1.6V~3.6V to drain from a single voltage supply. Putting voltage greater than 250mA on the multiplexer may cause damage.
AS1741G Features
1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
-3db Bandwidth: 130MHz
AS1741G Applications
There are a lot of ams AS1741G Analog Switches & Multiplexers ICs applications.
- Isolation
- Public switching systems
- PDH Multiplexers
- SDH
- Intelligent PBX
- Microprocessor Controlled Analog Systems
- PBX interfaces
- ATM
- Audio/video switches
- Optical Applications
