AT17F040A-30JU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F040A |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | 2-Wire, Serial |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Operating Mode | SYNCHRONOUS |
| Organization | 4MX1 |
| Density | 4 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height | 3.68mm |
| Length | 9.04mm |
| Width | 9.04mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F040A-30JU Overview
An interesting 20-LCC (J-Lead) package is used for this.Packaging for the external use of Tube.An individual who is qualified to operate within the -40°C~85°C domain.FLASH is the program that allows it to be programmed.The voltage is 2.97V~3.63V.There is a memory device mounted in Surface Mount position for this device.For other related parts, search "AT17F040A".The supply voltage should be 3.3V.20 terminations with different functions.There is a maximum voltage of 3.63V that can be applied to this memory device.There must be a minimum voltage of 2.97V to supply the device with the power it needs.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.If you're reflow soldering, you shouldn't go above 245.20 pins are located on the board.To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the part.In other words, it is suitable for applications using the Surface Mount operating system.In order to control the sliding, the controller operates at a frequency of 10MHz.A 50mA-based operating system is used.
AT17F040A-30JU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 10MHz.
AT17F040A-30JU Applications
There are a lot of Microchip Technology AT17F040A-30JU applications of configuration proms for FPGAs.
- telecommunications
- Camcorders
- printers
- DVD disk buffer
- nonvolatile BIOS memory
- cell phones
- multimedia computers
- eDRAM
- personal digital assistants
- hard disk drive (HDD)
