AT17F080-30CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F080 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | 2-Wire, Serial |
| Nominal Supply Current | 20mA |
| Operating Mode | SYNCHRONOUS |
| Memory Width | 1 |
| Density | 8 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 1.14mm |
| Length | 5.99mm |
| Width | 5.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F080-30CU Overview
An interesting 8-TDFN package is used for this.Tube external packaging.-40°C~85°C license holder.FLASH is the program that allows it to be programmed.FPGA is powered by a voltage which is 2.97V~3.63V volts, and this voltage is the voltage from which the generator is powered.FPGA is mounted in Surface Mount.AT17F080 will give you other related parts.In order for it to function, it requires a voltage supply of 3.3V.Different functions are associated with 8 terminations.There is a maximum voltage of 3.63V that can be applied to this memory device.2.97V is the minimum voltage required to supply the device.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.In reflow soldering procedure, the temperature should be controlled to no higher than 260.There are 8 pins on it.To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the part.In other words, it is suitable for applications using the Surface Mount operating system.There is a frequency of 33MHz that is used by the switching controller.
AT17F080-30CU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 33MHz.
AT17F080-30CU Applications
There are a lot of Microchip Technology AT17F080-30CU applications of configuration proms for FPGAs.
- hard disk drive (HDD)
- DVD disk buffer
- data buffer
- main computer memory
- graphics card
- cell phones
- mainframes
- servers
- Camcorders
- telecommunications
