AT17LV512A-10JU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV512A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Organization | 512KX1 |
| Memory Width | 1 |
| Density | 512 kb |
| Standby Current-Max | 0.0002A |
| Endurance | 100000 Write/Erase Cycles |
| Data Retention Time-Min | 90 |
| Write Protection | HARDWARE |
| Ready/Busy | YES |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17LV512A-10JU Overview
The package uses a neat 20-LCC (J-Lead) interface.Packaging for the external use of Tube.A qualified individual to operate within -40°C~85°C is required.Using Serial EEPROM, you can program it.The voltage fed to it is 3V~3.6V 4.5V~5.5V.Surface Mount is the mounting position of this memory device.Other components related to "AT17LV512A" can also be found by searching the word.3.3V is the required supply voltage.A termination with different functions in the 20 axis.In order to use this memory device, a maximum voltage of 3.6V should be used.An operating voltage of 3V is required in order to supply the device.Reflow soldering should be done at 245°C maximum.FPGA is equipped wFPGAh 20 pins.Using a 3.3V power supply is recommended for best results.Therefore, ALSO OPERATES AT 5V SUPPLY is included in order to better meet customer needs.Memory is also known as a EEPROM memory.This is an application suitable for Surface Mount-based operating systems.The swicthing controller works at a frequency of 33MHz.Using 5mA, it operates.
AT17LV512A-10JU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 33MHz.
AT17LV512A-10JU Applications
There are a lot of Microchip Technology AT17LV512A-10JU applications of configuration proms for FPGAs.
- printers
- supercomputers
- telecommunications
- personal digital assistants
- hard disk drive (HDD)
- data buffer
- eSRAM
- embedded logic
- eDRAM
- nonvolatile BIOS memory
