ATF1504ASVL-20AC100
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Frequency (Max) | 66MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1500 |
| Speed Grade | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF1504ASVL-20AC100 Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the TQFP package.There are 64 I/Os programmed in it.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 3.3V is used to power it.The part is included in Programmable Logic Devices.It is equipped with 100 pin count.It is also characterized by YES.It is possible to construct digital circuits using 1500gates, which are devices that serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.There are 100 pins on the device.There is a maximum supply voltage of 3.6Vwhen the device is operating.In order for it to operate, a supply voltage of 3Vis required.There can be 66MHz frequency achieved.The operating temperature should be higher than 0°C.Temperatures should not exceed 70°C.If the maximal frequency is less than [0], it should be lower than that.Programmable logic types are divided into EE PLD.
ATF1504ASVL-20AC100 Features
TQFP package
64 I/Os
100 pin count
100 pins
ATF1504ASVL-20AC100 Applications
There are a lot of Atmel (Microchip Technology) ATF1504ASVL-20AC100 CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Handheld digital devices
- Address decoders
- Digital multiplexers
- State machine design
- POWER-SAVING MODES
- I/O PORTS (MCU MODULE)
- PLC analog input modules
- Random logic replacement
- USB Bus
