ATF16V8BQL-15XU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Packaging | Tube |
| Published | 1997 |
| Series | 16V8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 62MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF16V8B |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 20mA |
| Number of I/O | 8 |
| Nominal Supply Current | 20mA |
| Memory Type | FLASH |
| Max Supply Current | 80mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Access Time | 15 ns |
| Architecture | PAL-TYPE |
| Number of Gates | 250 |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Number of Product Terms | 64 |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF16V8BQL-15XU Overview
The PLD stock is mounted using Type Surface Mount.Programmable logic devices are programmable type of PLD Programmable logic device? EE PLD.The best value on the market can be found in 16V8 Series' performance-cost ratio.The 20-TSSOP (0.173, 4.40mm Width)'s package makes it widely used in electronics.Programmable logic devices are used for Programmable array logic's Packaging to use Tube-materials.In all macrocells, 8 is always present.The number ATF16V8B refers to the PLD stock's largest part.Mounting the PLD is in the direction of Surface Mount.Complex Programmable logic device 20 remains Programmable logic array's pin number.When 62MHz frequency is used, it still functions precisely.The current maximum working temperature is 85°C.When Programmable logic device is operating, it should be warmer than -40°C.Using a 4.5V volt supply voltage is the only way for it to work.There is no alternative to the 5.5V supply voltage for this PLD.A programmable 8 I/O is available on this board.At all times, 5V powers the Complex Programmable logic device.Inputs dedicated to 8 are embedded in the PLD.It has a 20 termination.You can apply it to the Programmable Logic Devices subcategory.A Programmable logic device's supplies are 5V.There are 64 product terms.The 8 outputs are numerous.5V voltage is required in order to operate it.If the supply temperature is not higher than 80mA, it will not work.Having the ability to operate at any Supply Voltage of 20mA makes this Programmable logic device a great choice for a wide range of applications.Gates called 250 exist.FLASH was chosen as the data storage value.
ATF16V8BQL-15XU Features
Mounting type of Surface Mount
Maximum temperature of 85°C
8 I/Os
ATF16V8BQL-15XU Applications
There are a lot of Microchip Technology ATF16V8BQL-15XU PLDs (Programmable Logic Device) applications.
- Electrically Devices
- high-performance microcomputer systems
- Battery operated devices
- Industrial
- Highly complex logic
- Low power applications
- Software
- Programmable Logic Devices
- High-speed Devices
- High-end communication equipment
