ATF22LV10C-10JU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Packaging | Tube |
| Published | 1997 |
| Series | 22V10 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF22LV10C |
| Number of Outputs | 10 |
| Power Supplies | 3.3/5V |
| Temperature Grade | OTHER |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 90mA |
| Number of I/O | 10 |
| Voltage - Input | 3.3V |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Access Time | 10 ns |
| Architecture | PAL-TYPE |
| Number of Gates | 500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 10 |
| Number of Product Terms | 132 |
| Height | 3.68mm |
| Length | 11.48mm |
| Width | 11.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF22LV10C-10JU Overview
Mounting is done with the Type Surface Mount method.EE PLD is the programmable type of PLD Programmable logic device?.Performance-cost ratio makes 22V10 Series the best value on the market.As a result of Programmable logic array's package, the 28-LCC (J-Lead) is widely used in electronics.Materials from Tube are used to make the packaging.An Programmable logic device's input voltage of 3.3V is provided.There are always macro cells in 10.There is a ATF22LV10C-shaped section on the PLD stock that is Programmable logic array's biggest part.Mounted in Surface Mount's direction.Complex Programmable logic device 28 has the same pin number as before.It can still function precisely at 83.3MHz?frequency.In the current state, 85°C is the maximum working temperature.As soon as Programmable logic devices are Programmable logic device's operational, it should be warmer than -40°C.Using a 3V volt supply voltage is the only way for it to work.Only 5.5V Supply Voltage will work with Programmable logic controller.10 I/Os are programmable.At all times, the Complex Programmable logic device is powered by 3.3V.Inputs dedicated to 10 are embedded in the PLD.Into it has been programmed a 28 termination.There is also the possibility of applying the Programmable Logic Devices subcategory.3.3/5V is the Programmable logic device's supply.Product terms are counted by 132.A number of 10 outputs are available.At most, it can operate at a temperature of 90mA.Having the ability to operate at any Supply Voltage of 90mA makes this Programmable logic device a great choice for a wide range of applications.As well as 500 gates, there are others.
ATF22LV10C-10JU Features
Mounting type of Surface Mount
Input voltage of 3.3V
Maximum temperature of 85°C
10 I/Os
ATF22LV10C-10JU Applications
There are a lot of Microchip Technology ATF22LV10C-10JU PLDs (Programmable Logic Device) applications.
- Electrically Devices
- High performance applications
- Various types of power-limited applications
- High-speed Devices
- Programmable Logic Devices
- Industrial
- Low power applications
- Battery operated devices
- Power-limited applications
- high-performance microcomputer systems
