ATF22V10C-10GM/883
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-CDIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Packaging | Tube |
| Published | 1997 |
| Series | 22V10 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 125MHz |
| Base Part Number | ATF22V10C |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Screening Level | MIL-STD-883 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 10 |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.08mm |
| Length | 32.005mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
ATF22V10C-10GM/883 Overview
The PLD stock is mounted with Type Through Hole screws.The programmable type of PLD Programmable logic device? is EE PLD.As far as performance-cost ratio is concerned, 22V10 Series is the best value on the market.Due to the 24-CDIP (0.300, 7.62mm)'s package, Programmable logic devices are widely used in the electronics industry.Programmable array logic's Packaging uses Tube-materials.10 macro cells are always present.The biggest part of the PLD stock is designated by the number ATF22V10C.Through Hole is mounted on the PLD.The pin number of the Complex Programmable logic device remains 24.The 125MHz frequency can still be used precisely.Currently, the maximum working temperature is 125°C.In Programmable logic device's operation, it should be warmer than -55°C.Only 4.5V volts will work with Programmable logic controller.It can only be powered by a 5.5V supply voltage.A programmable 10 I/O is available on this board.In order to power the Complex Programmable logic device at all times, a source of 5V must be used.Inputs dedicated to 10 are embedded in the PLD.It has been programmed with a 24 termination.A subcategory of Programmable Logic Devices can be applied to it.The Programmable logic device is supplied by 5V.A product term has a 132 value.Many 10 outputs exist.It requires 5V voltage to operate.
ATF22V10C-10GM/883 Features
Mounting type of Through Hole
Maximum temperature of 125°C
10 I/Os
ATF22V10C-10GM/883 Applications
There are a lot of Microchip Technology ATF22V10C-10GM/883 PLDs (Programmable Logic Device) applications.
- Low power applications
- Electrically Devices
- Programmable Logic Devices
- Software
- High-end communication equipment
- Microcomputer systems
- High performance applications
- High-speed Devices
- Power-limited applications
- high-performance microcomputer systems
