ATMEGA128L-8MNR
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 5.5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 16 |
| EEPROM Size | 4K x 8 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 4V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Base Part Number | ATMEGA128 |
| Qualification Status | Not Qualified |
ATMEGA128L-8MNR Overview
It is available in the 64-VFQFN Exposed Pad package for the benefit of saving space. Using Surface Mount, it is mounted. There is a Tape & Reel (TR) package available for it. With a processor of AVR cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~105°C TA. FLASH is its program memory type. The device has 53 I/Os. It has a part number of ATMEGA128 that can be used to locate similar components. At QUAD, it has its terminals. This circuit consists of 64 terminationals. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 4V, resulting in high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 64 pins are used. During the mounting process, the device is mounted based on the Surface Mount method. Microcontrollers contains this component. Using the devices' 128kB memory size, you can store programs and data. It is important to note that the maximum supply current is 5.5mA. A 3/5V source is used for powering it. This device achieves excellent efficiency at frequencies of 8MHz. It appears that there are 4 timers/counters in use. In order to ensure normal operation, the supply voltage (Vsup) must remain above 3V. Using an oscillator type Internal, it operates.
ATMEGA128L-8MNR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA128L-8MNR Applications
There are a lot of Microchip Technology ATMEGA128L-8MNR Microcontroller applications.
- Television
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Accu-check
- ECG machine
- Playstation
- Wastewater treatment
- Virtual reality VR robots
- Missile control
- Security systems
- Aerospace navigation systems
