ATSAM3A8CA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | SAM3A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 84MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3A |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 63 |
| RAM Size | 96K x 8 |
| Memory Type | FLASH, ROM |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 4 |
| Number of DAC Channels | 2 |
| Height | 1.45mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3A8CA-AU Overview
To save space, it is included in the 100-LQFP package. Surface Mount is the way to mount it. It comes in the package?of a Tray. The device has a ARM? Cortex?-M3 core processor. Working at -40°C~85°C TA temperature is recommended. Memory type FLASH is used for program memory. There are 63 I/Os on it. To find equivalent components, use its ATSAM3A base part number. At QUAD, its terminals are located. In this case, there are 100 terminationals. The SAM3A series includes this electrical component. It is possible to achieve high efficiency with a 1.8V supply voltage. As a storage type for data, FLASH, ROM is used. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 100 pins. Subcategory Microcontrollers includes this component. Using the devices' 512kB memory size, you can store programs and data. A core architecture of ARM is used. At a frequency of 84MHz, it exhibits excellent efficiency. 3.6V offers full adaptability and voltage supply when it is employed by designers. In total, there are 1 timers and counters. It is one of the members of the CPU family CORTEX-M3. Using an oscillator type Internal, it operates.
ATSAM3A8CA-AU Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3A8CA-AU Applications
There are a lot of Microchip Technology ATSAM3A8CA-AU Microcontroller applications.
- Calculator
- Robots
- Magnetic resonance imaging (MRI)
- Set-top boxes
- Accu-check
- Volt meter
- Aerospace navigation systems
- Medical instruments chromatographs
- Blenders
- Scanners
