ATSAMA5D26C-CNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2017 |
| Series | SAMA5D2 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Base Part Number | ATSAMA5D26 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.1V |
| Speed | 500MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Height Seated (Max) | 1.4mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
ATSAMA5D26C-CNR Overview
The embedded microprocessor ships overseas conveniently packed in 289-LFBGA. High reliability is achieved by using advanced packaging methods Cut Tape (CT). There are 1 Core 32-Bit cores per bus width on the CPU. It is important to understand the operating temperature around -40°C~105°C TA. From the SAMA5D2 series. With a core count of ARM? Cortex?-A5, this CPU is multicore. LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers are used by this CPU. The microprocessor features interfaces I2C, SMC, SPI, UART, USART, QSPI for better service. The CPU runs at 3.3V when it comes to I/O. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. Search ATSAMA5D26 for variants of the embedded microprocessor. Total terminations are 289. A 1.2V voltage supply should be used to turn on and run the cpu microprocessor. Supply current is maximum at 1.32V. This CPU has a wide external data Bus width of 32. CPU microprocessors with clock frequencies of 24MHz operate.
ATSAMA5D26C-CNR Features
ARM? Cortex?-A5 Core
ATSAMA5D26C-CNR Applications
There are a lot of Microchip Technology ATSAMA5D26C-CNR Microprocessor applications.
- Dryers
- Ipad
- Xbox
- Dialysis machines (performs function of liver)
- Electromechanical control
- Fax machines
- Industrial robot
- Washing machines
- Network application field
- Glucose monitoring systems (for Type 1 Diabetes)
