ATSAMD21J18A-AFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100, SAM D21J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD21J18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J18A-AFT Overview
Due to its space-saving qualities, it is available in the 64-TQFP Exposed Pad package. Using Surface Mount, it is mounted. It comes in a Tape & Reel (TR) package. There is a ARM? Cortex?-M0+ as core processor in this device. It is important to keep the temperature at -40°C~125°C TA while working. FLASH is the type of program memory used by it. 52 I/Os can be found on it. It has a base part number of ATSAMD21J18 that can be used to find other components that are comparable. The terminals of this device are located at QUAD. It consists of 64 terminationals. The Automotive, AEC-Q100, SAM D21J series contains this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. The structure is constructed from 64 pins. It is mounted based on the method of Surface Mount. In order to store data and programs, the devices have a memory size of 256kB. Its core architecture is based on ARM. At a frequency of 48MHz, it can achieve excellent efficiency. The supply voltage of 3.3V's adaptability can be fully utilised by designers. A total of 8 timers/counters have been set up. Using a Internal oscillator type, it works well.
ATSAMD21J18A-AFT Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
ATSAMD21J18A-AFT Applications
There are a lot of Microchip Technology ATSAMD21J18A-AFT Microcontroller applications.
- X-ray
- Pacemakers (used to control abnormal heart rhythm)
- Television
- Glucose monitoring systems (for Type 1 Diabetes)
- Mobile computers
- Instrument control
- Electronic jamming systems
- Radio
- Washing machine
- Heart rate monitors
