Parameters |
Output Configuration |
Low Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
28mOhm |
RoHS Status |
ROHS3 Compliant |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Supplier Device Package |
DPAK-3 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
Automotive, AEC-Q100 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Outputs |
1 |
Output Type |
N-Channel |
Interface |
On/Off |
Current - Output (Max) |
4.9A |
AUIPS1025R Overview
The LED driver's packaged as a Tube.Package TO-252-3, DPak (2 Leads + Tab), SC-63 contains it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.In this case, the LED driving board can produce only 4.9AV as its maximum output.A component of this type is included in the Automotive, AEC-Q100 series.
AUIPS1025R Features
AUIPS1025R Applications
There are a lot of Rochester Electronics, LLC AUIPS1025R Power Switches ICs applications.
- Notebook PC
- Hot Swap
- Gaming
- Set-Top Boxes
- Solid-State Drives
- USB Power Distribution
- Solid State Drivers
- Hot-Swap Systems
- Hard Disk Drives
- Hot Swaps