AUIPS2041LTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS2041L |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 1.4A |
| Output Configuration | Low Side |
| Power Dissipation | 1W |
| Output Current | 1.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 μs |
| Switch Type | General Purpose |
| Rise Time | 900ns |
| Fall Time (Typ) | 600 ns |
| Nominal Input Voltage | 6V |
| Turn-Off Delay Time | 8 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 100m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 1.7mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS2041LTR Overview
It is package in Tape & Reel (TR) case.This package is included in TO-261-4, TO-261AA.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.The AUIPS2041L family consists of this type.A total of 4 terminations can be found in it.In order to operate, the 4 pins are used.It has 1 functions.The maximum output current must drop to 1.4A to meet the operation criteria.Supply voltages of 14V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.In this case, there is 100mOhm resistance in the LED driving board.Electrical components such as this are included in the Automotive, AEC-Q100 series.The output current is set to 1.4A in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.
AUIPS2041LTR Features
Supplied from 14V
Resistance of 100mOhm
AUIPS2041LTR Applications
There are a lot of Infineon Technologies AUIPS2041LTR Power Switches ICs applications.
- HDD and SSD
- USB Power Distribution
- Smartphone and PDA
- Portable GPS
- Low Voltage I/O System Power
- Portable GPS Device
- Wireless/Networking Cards
- Portable/Handheld Devices
- Wireless Modem Data Cards
- Portable Video Game Players
