AUIR3316
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 5.5mOhm |
| Subcategory | Peripheral Drivers |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | AUIR3316 |
| Output Type | N-Channel |
| Max Output Current | 23A |
| Operating Supply Voltage | 26V |
| Voltage | 26V |
| Interface | On/Off |
| Current | 23A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 300 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Number of Inputs | 1 |
| Max Input Voltage | 26V |
| Output Current per Channel | 7A |
| Rise Time | 80μs |
| Fall Time (Typ) | 100 μs |
| Nominal Input Voltage | 26V |
| Turn-Off Delay Time | 350 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 5.5m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 16.51mm |
| Length | 10.668mm |
| Width | 4.826mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
AUIR3316 Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the TO-220-5 package.It has been mounted as Through Hole on the LED driver.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.It is part of the AUIR3316 family of LED drivers.A total of 5 terminations have been found in it.5 pins are used for operation.There are 1 functions of the LED driver.This operation requires the maximum output current to be decreased to 23A.Supply voltages of 14V allow for high efficiency.Through Hole is mounted in the way of this LED driving board.In this LED driving board, there is 5.5mOhm resistance.It is included in the Automotive, AEC-Q100 series.It is set to 7A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The supply voltage should be set at 26V for best efficiency.Input voltage is limited to 26V volts.There is a minimum input voltage of 6V volts.1 inputs are provided.
AUIR3316 Features
Supplied from 14V
Resistance of 5.5mOhm
AUIR3316 Applications
There are a lot of Infineon Technologies AUIR3316 Power Switches ICs applications.
- Mobile Communication Devices
- USB Protection
- Notebook PC
- HDD, SSD
- USB3.1 Power Delivery
- Solid-State Drives
- Wearable Devices
- Wireless Modem Data Cards
- USB Ports/Hubs
- Notebook and Tablet Computers
