AUIR33401STRL
| Parameters | |
|---|---|
| Supplier Device Package | D2PAK (7-Lead) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 3mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Base Part Number | AUIR33401S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 33A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 18V |
| Current - Output (Max) | 33A |
| Current | 33A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 33A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 33A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~18V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 3mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3284mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab) |
| Number of Pins | 7 |
AUIR33401STRL Overview
The LED driver's packaged as a Tape & Reel (TR).It's included in the TO-263-7, D2Pak (6 Leads + Tab) package.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.It comes under the family of AUIR33401S.It is necessary to use the 7 pins in order to operate the LED driver.In terms of output, the lighting driver can provide a maximum of 33A V.Maximum output current falls to 33A when operation criteria are met.It is mounted in the way of Surface Mount.There is 3mOhm resistance on the LED driver.This electrical component can be found in the Automotive, AEC-Q100 series.This case has the output current set to 33A.In order to maximize efficiency, the supply voltage should be set to 5.5V.For stable operation, the maximum operating temperature is 150°C°C.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.A maximum supply voltage of 18VV can be handled by the LED driving board.
AUIR33401STRL Features
Resistance of 3mOhm
AUIR33401STRL Applications
There are a lot of Infineon Technologies AUIR33401STRL Power Switches ICs applications.
- Smartphone and PDA
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- USB Protection
- Hot Swap
- Portable/Handheld Devices
- Notebook and Tablet Computers
- Handheld Devices
- PC Cards
- Hot-Swap Systems
