BD2052AFJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 130MOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Base Part Number | BD20*2A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Max Output Voltage | 6V |
| Switch Type | USB Switch |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 6000 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 100m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.375mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2052AFJ-E2 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.USB Switch is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 2 outputs.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.The BD20*2A family contains this object.A total of 8 terminations have been found in it.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 500mA when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 8 pins.It has a resistance of 130MOhm.It is set to 500mA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A 5V power supply is used by the part.There is a maximum input voltage of 5.5V volts.
BD2052AFJ-E2 Features
Supplied from 5V
Resistance of 130MOhm
BD2052AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2052AFJ-E2 Power Switches ICs applications.
- PC Card Hot Swap
- Wearable Devices
- Handheld Devices
- Gaming
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Hot Swap
- Set-top-box
- USB Power Distribution
- Portable GPS
