BD2055AFJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 500mA |
| Base Part Number | BD20*5A |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Power | 560mW |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2055AFJ-E2 Overview
It is packaged in the form of a Tape & Reel (TR).It's included in the 8-SOIC (0.154, 3.90mm Width) package.Mounting type Surface Mount is selected for the LED driving board.USB Switch is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Status Flag features.It belongs to the BD20*5A family.It has a total of 8 terminations.The 8 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.It is necessary to reduce the maximum output current to 250mA to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 8 pins.Currently, the LED driving board has 100MOhm resistance.When this is the case, the output current is set to 250mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).Normal operation requires Vsup above 2.7V.This part has a power supply of 5V volts.
BD2055AFJ-E2 Features
Supplied from 5V
Resistance of 100MOhm
BD2055AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2055AFJ-E2 Power Switches ICs applications.
- Mobile Communication Devices
- Various applications equipped with buttons
- Wearable Devices
- USB Power Distribution
- Telecom and Network Systems
- USB Power Distribution
- Wireless Headsets
- Notebook PC
- USB3.1 Power Delivery
- USB Ports/Hubs
