BD2220G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 210mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 670mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD2220 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.35A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
BD2220G-TR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the SC-74A, SOT-753 package, it is included.Mounting type Surface Mount is selected for the LED driving board.It owns the USB Switch switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.By default, it is set to output 1.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.It belongs to the BD2220 family.A total of 5 terminations have been recorded.In order to operate, the 5 pins are used.It contains 1 functions.Maximum output current falls to 500mA when operation criteria are met.Using a voltage of 5V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 5 pins.It has 210mOhm resistance.This case has the output current set to 350mA.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.A 5V power supply is used by the part.The supply voltage should be set at 5V for best efficiency.
BD2220G-TR Features
Supplied from 5V
Resistance of 210mOhm
BD2220G-TR Applications
There are a lot of ROHM Semiconductor BD2220G-TR Power Switches ICs applications.
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Portable Music Players
- PC Card Hot Swap
- USB Protection
- Hot-Swap Systems
- Set-top-box
- Portable GPS
- PC Cards
- HDD, SSD
