BD7851FP-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Number of Pins | 25 |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN COPPER |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Pin Count | 25 |
| Output Voltage | 10V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100μA |
| Output Current | 50mA |
| Output Current per Channel | 50mA |
| Rise Time | 300ns |
| Fall Time (Typ) | 300 ns |
| Interface IC Type | SIPO BASED PERIPHERAL DRIVER |
| Number of Drivers | 16 |
| Turn On Time | 0.1 µs |
| Output Peak Current Limit-Nom | 0.05A |
| Number of Segments | 16 |
| Turn Off Time | 0.1 µs |
| Display Mode | SEGMENT |
| Height | 1.9mm |
| Length | 13.6mm |
| Width | 5.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD7851FP-E2 Overview
In this case, the terminations are set to 25.There are 25 pins on its base.In total, it includes 16 segments.It is mounted in the way of Surface Mount.The voltage of 5.5V can be supplied.25 pins are used on the device.In addition, it can also be categorized into Display Drivers based on its characteristics.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 4.5V.An operating temperature above 85°C should ensure stable operation.In this case, the load can only be supplied with 50mA current.Stable operation requires a temperature greater than -30°C.It is necessary to use 5V voltage to power systems.The interface IC that the part is equipped with is indicated by SIPO BASED PERIPHERAL DRIVER.A 10V voltage is output by it.
BD7851FP-E2 Features
Supply voltage of 5V
Operating with the supply voltage of 5V
Output voltage of 10V
BD7851FP-E2 Applications
There are a lot of ROHM Semiconductor BD7851FP-E2 LED Driver ICs applications.
- LED headlights
- High-end retail lighting
- White LED Backlight for portable equipment
- Stage and Studio lighting
- Museum lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Auxiliary lights for on-vehicle cameras
- Amusement Machines
- Linear fluorescent
- Flicker-free LED Lighting using R1580N
