banner_page

BPV23FL

BPV23FL datasheet pdf and Optical Sensors - Photodiodes product details from Vishay Semiconductor Opto Division stock available at Noco


  • Manufacturer: Vishay Semiconductor Opto Division
  • Nocochips NO: 879-BPV23FL
  • Package: Radial
  • Datasheet: PDF
  • Stock: 996
  • Description: BPV23FL datasheet pdf and Optical Sensors - Photodiodes product details from Vishay Semiconductor Opto Division stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial
Number of Pins 2
Operating Temperature -40°C~100°C
Packaging Bulk
Published 2009
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 100°C
Min Operating Temperature -40°C
Capacitance 48pF
Diode Type PIN
Power Dissipation 215mW
Viewing Angle 120°
Forward Current 50mA
Response Time 70ns
Voltage - DC Reverse (Vr) (Max) 60V
Rise Time 70ns
Forward Voltage 1.3V
Fall Time (Typ) 70 ns
Max Reverse Voltage (DC) 60V
Reverse Breakdown Voltage 60V
Reverse Voltage 60V
Wavelength 950nm
Dark Current 2nA
Spectral Range 870nm ~ 1050nm
Active Area 4.4mm2
Current - Dark (Typ) 2nA
REACH SVHC Unknown
RoHS Status ROHS3 Compliant

BPV23FL Overview


These photodiodes are packaged in the Bulk to protect them from damage. For safety reasons, the photodiodes are packaged in Radial packages. When reverse-bias is applied continuously, the photodiodes are able to withstand only 60V voltage. A continuous voltage of 60V should not be applied to the photodiodes in reverse-bias mode. 2 pins are present on the photodiodes. There was the possibility that photodiodes in a circuit would emit 215mW heat. Photodiode operation should take place at temperatures below 100°C. However, the minimum operating temperature of the photodiodes should be set to -40°C. Photodiodes should have a reverse anode voltage of 60V. Photodiodes require an electric potential of 1.3V in order to conduct current. The photodiodes provided 60V when reverse-biased. Even in the absence of light input, a photodiode occurs 2nA current.

BPV23FL Features


Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 870nm ~ 1050nm
Response Time: 70ns
Viewing Angle: 120°

BPV23FL Applications


There are a lot of Vishay Semiconductor Opto Division BPV23FL Photodiodes applications.

  • Infrared data transmission
  • Pure UV-C Monitoring
  • Light Bariers
  • Pulse Oximetry
  • Low Cost Light Monitoring
  • Range finding
  • Health Monitoring
  • Measurement Levelling
  • Machine Controls
  • YAG laser detection

Write a review

Note: HTML is not translated!
    Bad           Good