BQ2002CPN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | BQ2002 |
| Pin Count | 8 |
| Max Output Current | 10mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 500μA |
| Output Current | 2A |
| Adjustable Threshold | NO |
| Max Output Voltage | 2V |
| Min Input Voltage | 4V |
| Max Input Voltage | 6V |
| Supply Current-Max (Isup) | 0.5mA |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1234 |
| Programmable Features | Voltage |
| Current - Charging | Constant Pulsed |
| Max Charge Current | 2A |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2002CPN Overview
This item can be found in the Tube package.An included version of it is available in the package 8-DIP (0.300, 7.62mm).Device mounting type Through Hole is specified.To ensure reliable performance, the temperature should be set to 0°C~70°C TA.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Constant Pulsed current is required to charge the device.A list of related parts can be found by searching for the base part number BQ2002.It contains 8 terminations, so that is how many there are.There are 8 pins on it.Features like Voltage can be programmed.There are 8 pins necessary to make it work.The total number of channels that can be accessed by users is 1.If it runs off of a 5V battery, then it should be able to run continuously.The device can withstand a supply voltage of 6V.During operation, 2A represents the output current.Devices in this category are classified as Power Management Circuits.A power supply voltage as low as 4V can be used for it and it will work as well as possible.0.5mA is set for Vsup (maximum supply voltage).It is set to 5V when it comes to the power supply for the part.Input voltage must be at least 4V volts in order to function.This gadget's power supply has a current of 500μA flowing through it.As a rule of thumb, the supply voltage needs to be set to 5V for optimum efficiency.The maximum input voltage is 6V volts.Voltage 2V is the maximum output voltage needed for this operation.In the course of operation, the maximum output current is reduced to 10mA.
BQ2002CPN Features
1 channels
Power Management Circuits subcategory
8-DIP (0.300, 7.62mm) package
BQ2002CPN Applications
There are a lot of Texas Instruments BQ2002CPN Battery Chargers ICs applications.
- Battery backup applications
- Energy harvesting
- Opportunity charge
- Home routers
- Power tools
- Industrial handhelds
- MP3, MP4 player
- Emergency/Security
- Smart cameras
- Trash compactors
