BQ2003S-NTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Base Part Number | BQ2003 |
| Pin Count | 16 |
| Output Voltage | 5.5V |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Operating Supply Current | 750μA |
| Output Current | 2A |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2.2mA |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | PUSH-PULL |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1234 |
| Switching Frequency | 300kHz |
| Programmable Features | Timer, Voltage |
| Current - Charging | Constant |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2003S-NTR Overview
It is included in the Tape & Reel (TR) package for convenience.The 16-SOIC (0.295, 7.50mm Width) package includes it as a convenience.A mounting type of Surface Mount has been specified for this device.The temperature should be set to 0°C~70°C TA to ensure reliable performance.It functions by using an analog IC called BATTERY CHARGE CONTROLLER.Charge the device by providing it with Constant current.Based on the base part number BQ2003, its related parts can be identified.In general, the number of terminations found within it is 16 as a whole.In addition, it is equipped with 16 pins.A number of programmable features are available, including Timer, Voltage.It is necessary to connect the 16 pins during the installation process of this product.The device can withstand a supply voltage of 5.5V.It is possible to achieve high efficiency by using an output voltage of 5.5V.It is performed with a current output of 2A for the output of the operation.Using a supply voltage as low as 4.5V will allow it to function.During the design process, Vsup (maximum supply voltage) was set to 2.2mA.There is a minimum input voltage of 4.5V volts.A 750μA supply current is set on the gadget.The device is 5V input voltage.The best efficiency can be achieved by setting the supply voltage to 5V.With 300kHz switching frequency, the part operates.
BQ2003S-NTR Features
Switching frequency of 300kHz
16-SOIC (0.295, 7.50mm Width) package
BQ2003S-NTR Applications
There are a lot of Texas Instruments BQ2003S-NTR Battery Chargers ICs applications.
- Fleet management
- Wireless power
- Smart power strips
- USB power delivery (USB-C) devices
- Marine buoy lights
- Home routers
- Personnel carriers
- Floor scrubber
- Pallet jacks
- Automotive electronics
