BQ24014DRCRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 25.089328mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | bqTINY™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24014 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | NO |
| Min Input Voltage | 3V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 16.5V |
| Fault Protection | Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24014DRCRG4 Overview
It is included in the Tape & Reel (TR) package. A 10-VFDFN Exposed Pad package is included with this item as part of its contents.In this case, the device has a mounting type of Surface Mount.The best thing to do is to set the temperature to -40°C~125°C TJ.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Charge the device by providing it with Constant - Programmable current.The base part number BQ24014 represents its related parts.It has 10 terminations.As far as the battery pack is concerned, it is 4.2V.The device has a total of 10 pins.In addition to Current, Timer, there are several other programmable options.The operation?are 10 pins.A total of 1 channels are available for use.Using a 4.5V battery should be enough to run it.Withstanding a voltage of 16.5V, it is a reliable piece of equipment.In the case of 4.2V output voltage, there is a possibility of optimal efficiency.It is performed with a current output of 1A for the output of the operation.This device is a member of subcategory Power Management Circuits.A power supply voltage as low as 3V can be used for it and it will work as well as possible.It is set to 5mA for Vsup (maximum supply voltage).Among the electrical components in the bqTINY? series, it is one of the most common.Input voltage must be at least 3V volts in order to function.
BQ24014DRCRG4 Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
BQ24014DRCRG4 Applications
There are a lot of Texas Instruments BQ24014DRCRG4 Battery Chargers ICs applications.
- Smart cameras
- Automotive electronics
- Rental fleets
- Wireless headphones
- Emergency/Security
- High end, feature-rich consumer
- Electric pallet truck
- Modern LA
- Automotive/electrical vehicle
- Mobile lighting
