BQ24090DGQT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24090 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 1A |
| Operating Supply Voltage | 6.5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 3.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 1A |
| Output Current | 1A |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.23V |
| Min Input Voltage | 4.5V |
| Nominal Input Voltage | 7V |
| Min Output Voltage | 4.16V |
| Threshold Voltage | 6.65 |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Voltage - Supply (Max) | 6.45V |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24090DGQT Overview
There is a version of it included in the package Tape & Reel (TR).The product comes in the package of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad.In this case, the device is mounted in the way of Surface Mount.Keeping the temperature at 0°C~125°C TJ will ensure reliable performance.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.Device charging requires Constant - Programmable current.It is possible to find the related parts of this device by looking at its base part number BQ24090.There are no terminations in it at all.10 pins are attached to it.A number of programmable features are available, including Current.In order to operate it, it has 10 pins.The total number of channels that can be accessed by users is 1.There is a maximum voltage of 6.45V for the device.Using a 4V battery should be enough to run it.It is important that the supply voltage does not exceed 7V for the device to work properly.As long as the output voltage is set to 4.2V, then there is a possibility of optimal efficiency being achieved.In order to operate, an output current of 1A is used.Subcategory 0 is home to this device.Using a supply voltage as low as 3.5V will allow it to function.Voltage input must be at least 4.5V volts.This gadget's power supply has a current of 1A flowing through it.The best efficiency can be achieved by setting the supply voltage to 6.5V.The maximum output supply voltage is reduced to 4.23V to fulfill the operation requirements.In order to comply with the constraints, the maximum output current is reduced to 1A.
BQ24090DGQT Features
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
BQ24090DGQT Applications
There are a lot of Texas Instruments BQ24090DGQT Battery Chargers ICs applications.
- Energy harvesting
- GPS portable devices
- Truck dealers
- Charging cradle for wearable devices
- Electricity bank
- Portable devices
- Golf carts
- Pallet jacks
- Industrial handhelds
- Rental fleets
