BQ24160ARGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BQ24160 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.44V |
| Operating Supply Voltage | 10V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Channels | 1 |
| Interface | I2C |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Output Current | 2.5A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 5mA |
| Threshold Voltage | +3.8V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1.5MHz |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 2.5A |
| Battery Pack Voltage | 3.7V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24160ARGER Overview
If you are looking for it in the Tape & Reel (TR) package, then you have found it.In order to make it more convenient, it has been included in the 24-VFQFN Exposed Pad package.Device mounting type Surface Mount is specified.It is best to set the temperature to -40°C~85°C TA.An analog IC of POWER SUPPLY MANAGEMENT CIRCUIT is used in this device.To charge the device, you need Constant - Programmable current.By using the base part number BQ24160, related parts can be found for this device.As you can see, it has 24 terminations in it.It is set to 3.7V for the battery pack.The charging current of the part is 2.5A at maximum.To operate the product, it is necessary that 24 pins be inserted into the device.Currently, there are 1 available channels.Batteries with 5V should be able to power it.The 4.44V output voltage allows for high efficiency.A 2.5A output current is used for operation.The device you are looking at belongs to the subcategory of Power Management Circuits.Amounting is in line with Surface Mount.It is set to 5mA for Vsup (maximum supply voltage).For best efficiency, set the supply voltage to 10V.As far as switching frequency is concerned, the part runs at 1.5MHz.It is important for a normal operation of the device that the supply voltage (Vsup) be maintained above 4.2V.
BQ24160ARGER Features
Battery pack voltage of 3.7V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
24-VFQFN Exposed Pad package
BQ24160ARGER Applications
There are a lot of Texas Instruments BQ24160ARGER Battery Chargers ICs applications.
- Man lift
- Boat
- Conventional charge
- Portable medical equipment
- Cellphones
- Electric lift car
- Ruggedized notebooks/tablet computers
- Model aircraft
- Personnel carriers
- Smart cameras
