BSP752TXUMA1
| Parameters | |
|---|---|
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 200 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BSP752 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 52V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 1.3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~52V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
BSP752TXUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of BSP752.It contains 8 terminations.Currently, there are 1 functions associated with the lighting driver.The lighting driver's maximum output is 1.3AV.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.A total of 8 pins are included in this LED driver.It belongs to the miniPROFET? series.Vsup (maximum supply voltage) is set to 52V.For normal operation, the supply voltage (Vsup) must be kept above 6V.
BSP752TXUMA1 Features
Supplied from 13.5V
BSP752TXUMA1 Applications
There are a lot of Infineon Technologies BSP752TXUMA1 Power Switches ICs applications.
- Wireless/Networking Cards
- Hot-Swap Systems
- Hot Swaps
- USB Ports/Hubs
- Storage (HDDs, SSDs)
- Handheld Devices
- PDAs
- HDD, SSD
- Storage Drives
- Portable Music Players
