banner_page

BSP772TXUMA1

N-Channel PMIC miniPROFET? Series BSP772 13.5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BSP772TXUMA1
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 895
  • Description: N-Channel PMIC miniPROFET? Series BSP772 13.5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2001
Series miniPROFET®
JESD-609 Code e3
Feature Auto Restart
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin (Sn)
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 13.5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number BSP772
Pin Count 8
JESD-30 Code R-PDSO-G8
Number of Outputs 1
Output Type N-Channel
Supply Voltage-Max (Vsup) 34V
Supply Voltage-Min (Vsup) 5V
Interface On/Off
Current - Output (Max) 2.6A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5V~34V
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Output Peak Current Limit-Nom 17A
Rds On (Typ) 50m Ω
Turn Off Time 230 µs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE
Output Current Flow Direction SINK
Length 5mm
Width 4mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week

BSP772TXUMA1 Overview


The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.Auto Restart features are available on the lighting driver.It is a member of the BSP772 family.The termination count is 8.It has 1 functions.2.6AV is the maximum output of the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.This LED driver is equipped with a total of 8 pins.A component of this type is included in the miniPROFET? series.The lighting driver is configured to have a maximum supply voltage of 34V (Vsup).Normal operation requires Vsup above 5V.

BSP772TXUMA1 Features


Supplied from 13.5V

BSP772TXUMA1 Applications


There are a lot of Infineon Technologies BSP772TXUMA1 Power Switches ICs applications.

  • PDAs
  • Telecom and Network Systems
  • Storage (HDDs, SSDs)
  • Storage Drives
  • Portable Devices
  • Portable/Handheld Devices
  • USB3.1 Power Delivery
  • Various applications equipped with buttons
  • Mobile Communication Devices
  • Hot-Swap Systems

Write a review

Note: HTML is not translated!
    Bad           Good