BTS432E2E3043
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS432E2 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Supply Voltage-Max (Vsup) | 42V |
| Interface | On/Off |
| Nominal Supply Current | 1.1mA |
| Output Configuration | High Side |
| Power Dissipation | 125W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.1mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~42V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 300 μs |
| Output Peak Current Limit-Nom | 44A |
| Rds On (Typ) | 30m Ω |
| Turn Off Time | 80 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
BTS432E2E3043 Overview
It is packaged in the manner of a Tube.There is a TO-220-5 package that includes it.The lighting driver has the mounting type Through Hole.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.A lighting driver with Auto Restart, Status Flag features is available.It belongs to the BTS432E2 family.As a result, there are 5 terminations.For operation, we use the 5 pins.There are 1 functions of the LED driver.The maximum output current drops to 9A in order to meet the operation criteria.Supply voltages of 12V allow for high efficiency.The lighting driver is mounted in the direction of Through Hole.This LED driver is equipped with a total of 3 pins.It has a resistance of 30mOhm.It is part of the PROFET? series.As a result, the output current is set to 9A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The maximum supply voltage for this lighting driver is set to 42V (Vsup).It operates at a maximum current of 1.1mA.
BTS432E2E3043 Features
Supplied from 12V
Resistance of 30mOhm
BTS432E2E3043 Applications
There are a lot of Infineon Technologies BTS432E2E3043 Power Switches ICs applications.
- Telecom and Network Systems
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Portable GPS Device
- Storage Drives
- Wearable Devices
- Portable/Handheld Devices
- Hot-Swap Systems
- Wireless Modem Data Cards
- Mobile Communication Devices
