BTS442E2E3062ANTMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, PROFET® |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 17A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 350 µs |
| Output Peak Current Limit-Nom | 70A |
| Rds On (Typ) | 15m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 4.5mm |
| Length | 9.9mm |
| Width | 9.2mm |
| RoHS Status | RoHS Compliant |
BTS442E2E3062ANTMA1 Overview
A Tape & Reel (TR) is used to package it.The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package includes it.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Auto Restart, Status Flag.The termination count is 4.There are 1 functions of the LED driver.Its maximum output voltage is 17AV.High efficiency is possible when the supply voltage is set to 12V.A total of 3 pins are included in this LED driver.This electrical component can be found in the Automotive, AEC-Q100, PROFET? series.The maximum supply voltage for this lighting driver is set to 42V (Vsup).Normal operation requires Vsup above 4.5V.
BTS442E2E3062ANTMA1 Features
Supplied from 12V
BTS442E2E3062ANTMA1 Applications
There are a lot of Infineon Technologies BTS442E2E3062ANTMA1 Power Switches ICs applications.
- Notebook PC
- Portable GPS
- USB Protection
- Hard Disk Drives
- Smart Phones, Feature Phones
- Portable/Handheld Devices
- Solid State Drivers
- Hot Swap
- Notebook and Tablet Computers
- USB Power Distribution
