BTS500801EGAAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Base Part Number | BTS50080 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 13A |
| Supply Voltage-Min (Vsup) | 9V |
| Interface | On/Off |
| Nominal Supply Current | 24mA |
| Output Configuration | High Side |
| Output Current | 13A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9V~16V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 500 μs |
| Rds On (Typ) | 8m Ω |
| Turn Off Time | 500 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.6mm |
| Length | 7.5mm |
| Width | 6.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS500801EGAAUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).Package 12-BSOP (0.295, 7.50mm Width) Exposed Pad contains it.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Auto Restart features is available.The BTS50080 family contains this object.It has a total of 12 terminations.In order to operate, the 12 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 13A to meet the operation criteria.Supply voltages of 13.5V allow for high efficiency.In this case, it is mounted in the way of Surface Mount.Electrical components such as this are included in the PROFET? series.When this is the case, the output current is set to 13A.In order to operate normally, the supply voltage (Vsup) must remain above 9V.
BTS500801EGAAUMA1 Features
Supplied from 13.5V
BTS500801EGAAUMA1 Applications
There are a lot of Infineon Technologies BTS500801EGAAUMA1 Power Switches ICs applications.
- Handheld Devices
- USB Protection
- Hot Swap
- USB Power Distribution
- Portable Video Game Players
- Hot Swap
- Storage (HDDs, SSDs)
- Gaming
- Notebook PC
- Wireless/Networking Cards
