BTS500851TMBAKSA1
| Parameters | |
|---|---|
| Output Configuration | High Side |
| Power Dissipation | 170W |
| Output Current | 9.9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 800μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5V |
| Max Input Voltage | 58V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 44A |
| Nominal Input Voltage | 58V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~58V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 11.1A |
| Rds On (Typ) | 7.2m Ω |
| Turn Off Time | 400 µs |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 4.4mm |
| Length | 10mm |
| Width | 9.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Resistance | 7.2mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 170W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | BTS50085 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 90A |
| Operating Supply Voltage | 58V |
| Voltage | 58V |
| Interface | On/Off |
| Current - Output (Max) | 38A |
| Nominal Supply Current | 800μA |
| Current | 44A |
BTS500851TMBAKSA1 Overview
As a result, it is packaged in the form of a Tube.It's included in the TO-220-7 (Formed Leads) package.In this case, the LED driving board is mounted as Through Hole.General Purpose is the switch type that it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.It belongs to the family BTS50085.It contains 7 terminations.7 pins are used for operation.Currently, there are 1 functions associated with the lighting driver.38AV is the maximum output of the LED driver.As a result, the maximum output current is reduced to 90A in order to meet the operation requirements.A supply voltage of 24V leads to high efficiency.7.2mOhm is the resistance of the lighting driver.This electrical component can be found in the PROFET? series.This results in a 9.9A output current.It is recommended to set the supply voltage to 58V for optimum efficiency.It has a maximum input voltage of 58V volts.Input voltage must be at least 5V volts.For its operation, a maximum current requirement of 800μA is required.
BTS500851TMBAKSA1 Features
Supplied from 24V
Resistance of 7.2mOhm
BTS500851TMBAKSA1 Applications
There are a lot of Infineon Technologies BTS500851TMBAKSA1 Power Switches ICs applications.
- Storage Drives
- USB Protection
- Hard Disk Drives
- PC Cards
- Portable Music Players
- Portable GPS Device
- Wireless Modem Data Cards
- Solid-State Drives
- PC Card Hot Swap
- Wireless Headsets
