BTS50101EKBXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 250 μs |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 10m Ω |
| Turn Off Time | 250 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS50101EKBXUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).It's included in the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package.The LED driver is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.It has a total of 14 terminations.During operation, the 14 pins are used.There are 1 functions of the LED driver.This operation requires the maximum output current to be decreased to 10A.The supply voltage can be 13.5V for high efficiency.This lighting driver is mounted in the way of Surface Mount.There is an electrical component included in the PROFET? series.When this is the case, the output current is set to 10A.In this case, Vsup (maximum supply voltage) is set to 28V.For normal operation, the supply voltage (Vsup) must be kept above 5V.
BTS50101EKBXUMA1 Features
Supplied from 13.5V
BTS50101EKBXUMA1 Applications
There are a lot of Infineon Technologies BTS50101EKBXUMA1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Smart Phones, Feature Phones
- Smartphone and PDA
- USB Power Distribution
- Storage Drives
- HDD and SSD
- PDAs
- Solid-State Drives
- Notebook and Tablet Computers
- Portable Devices
