Parameters |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
2 |
Supply Voltage |
13.5V |
Terminal Pitch |
1mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
12 |
Qualification Status |
Not Qualified |
Max Output Current |
50A |
Operating Supply Voltage |
28V |
Power Supplies |
9/16V |
Number of Channels |
2 |
Max Supply Voltage |
28V |
Min Supply Voltage |
4.5V |
Power Dissipation-Max |
1.4W |
Nominal Supply Current |
3.2mA |
Max Supply Current |
4mA |
Current - Output |
6A |
Turn On Delay Time |
250 μs |
Halogen Free |
Halogen Free |
Output Current per Channel |
6.3A |
Turn-Off Delay Time |
250 μs |
Interface IC Type |
HALF BRIDGE BASED PERIPHERAL DRIVER |
Driver Number of Bits |
2 |
Screening Level |
AEC-Q100 |
Output Peak Current Limit-Nom |
4.5A |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Length |
7.5mm |
Width |
6.4mm |
RoHS Status |
RoHS Compliant |
Surface Mount |
YES |
Number of Pins |
12 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
12 |
ECCN Code |
EAR99 |
Resistance |
19mOhm |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
150°C |
Min Operating Temperature |
-40°C |
Subcategory |
Peripheral Drivers |
Technology |
MOS |
Terminal Position |
DUAL |
BTS5246-2L Overview
Currently, there are 2 channels accessible.There are 12 terminations in total.In this case, the device is located at terminal DUAL.The device consists of a total of 12 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 13.5V.This device uses 12 pins for operation.This gadget is self-contained in?Peripheral Drivers.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.Hot-swappable device is important to note that the part has a power supply 9/16V.28VV is the maximum supply voltage it can handle.If necessary, it can work with a low supply voltage, such as 4.5VV.When operating criteria are met, the maximum output current is reduced to 50A.Its maximum current requirement is 4mA.19mOhm resistance is present in the device.
BTS5246-2L Features
The terminal position of 12
BTS5246-2L Applications
There are a lot of Infineon Technologies BTS5246-2L hot swap controllers applications.
- Industrial application
- Limitting the inrush current
- Automotive circuits
- PC board hot swap insertion and removal
- Short-circuit protection in real time
- Raid
- Safe board insertion and extraction
- Active current limit
- Disconnect faulty loads before supply voltage drops
- Power supply hotswap & inrush control